PC-Fahrenheit Putty Epoxy is the choice for temperatures up to 260° C/500° F.
It is supplied as a pre-measured stick that you mix with fingers. Fast curing (60 min). Best for steam heat applications. A toolbox must. Great on copper and iron.
Working time: Approx. 8 minutes
Cure time: 1 hour
Why use a putty epoxy? Hand mouldable putty epoxies are especially designed for emergency type repairs where time is of the essence. The putties contain no solvents or VOCs. They are non-flammable and release no noxious fumes. They do not shrink or pull away from the surface. The consistency eliminates drips and runs, promotes adhesion to the surface and allows the material to be shaped and formed as needed before curing begins.
Easy mix The two parts are wrapped together. Simply slice off the required amount and roll it between your fingers until the two colours are no longer distinguishable from each other.
Waterproof PC-Fahrenheit is not only waterproof but has excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Multipurpose Use PC-Fahrenheit on exhausts, engine blocks, grills, stoves, steam pipes and more. (Some surfaces may benefit from prepping before use.)
Finishing touches After PC-Fahrenheit has cured it can be sawed, sanded, tapped, drilled, machined, filed and painted.
Work time (at 21c): 20 min Service time (at 21c): 1 hour No drip or sag: ✓ Fill characteristics: Good Apply to wet surface: ✕ Heat range: -30c to 120c Tensile strength: 900 PSI Colour: Dark grey Tintable: ✕
For more product information, including prep and cleanup tips, FAQs and safety data sheets, please click here.
Buy PC-Fahrenheit 2oz St by PC-Products:
Purchasing has now moved to our dedicated PC-Epoxy website. Please click here to purchase.
PC-Fahrenheit is available in these sizes:
Take a look at PC-Products' other Emergency Repair products:
