PC-11 thrives in wet environments. It is resistant to water whether it is fresh or salt.
Thick consistency like PC-7 and long open time (30 min). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can’t remove water and moisture or you want the white color for your repair, PC-11 is your choice. Choose PC-11 for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part A (white) and the hardener part B (light blue) react to form a bond of tremendous strength and flexibility. The PC-11 formulation is slow curing, but slow can be a good thing especially for large tasks.
PC-11 is thick. Thick is good if you need to work vertically or want to hold an object in place. How thick? Not quite as thick as peanut butter.
Working time: 30 minutes
Cure time: 24 hours (tack free in 90 mins, 48 hours for full cure)
Why use a paste epoxy? Paste epoxies are for the heavy duty, permanent repairs. Paste epoxies give extra working time for large jobs and are the strongest epoxies in the PC-Products family of repair products. Your choice for critical repairs.
Easy mix The two parts are differently coloured, simply mix until you can no longer distinguish between the two colours. PC-11 1 Ounce is supplied in a syringe which will dispense equal quantities of the two parts.
Waterproof PC-11 is not only waterproof but has excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Multipurpose Use PC-11 on fibreglass, concrete, wood, metals, brick, glass, block, ceramics, rubber (SBR, Buna and polyurethan rubbers but not EPDM, vinyl or neoprene rubbers), plastics (rigid PVC and CPVC, polyester and fibreglass, polyurethane, ABS and Bakelite but not polyethylene, polypropylene, HDPE, polysterene, nylon, acrylic, teflon or polycarbonate) and more . (Some surfaces may benefit from prepping before use.)
Finishing touches After PC-11 has cured it can be sawed, sanded, tapped, drilled, machined, filed and painted.
Work time (at 21c): 35 min Service time (at 21c): 8-15 hours No drip or sag: ✓ Fill characteristics: Excellent Apply to wet surface: ✓ Heat range: -30c to 95c Tensile strength: 1710 PSI Colour: Off white Tintable: ✓
For more product information, including prep and cleanup tips, FAQs and safety data sheets, please click here.
Buy PC-11 2oz by PC-Products:
Purchasing has now moved to our dedicated PC-Epoxy website. Please click here to purchase.
PC-11 is available in these sizes:
Take a look at PC-Products' other Permanent Repair products:
