PC-Plumbing Epoxy Putty is for pipes.
Use PC-Plumbing to stop leaks in less than 60 minutes. Pre-measured and easy to use and 2 part epoxy putty does not require tools. Hand mix and apply. NSF approved for plumbing repairs and for contact with potable water supply pipes.
Working time: Approx. 3 minutes
Cure time: 1 hour
Why use a putty epoxy? Hand mouldable putty epoxies are especially designed for emergency type repairs where time is of the essence. The putties contain no solvents or VOCs. They are non-flammable and release no noxious fumes. They do not shrink or pull away from the surface. The consistency eliminates drips and runs, promotes adhesion to the surface and allows the material to be shaped and formed as needed before curing begins.
Easy mix The two parts are wrapped together. Simply slice off the required amount and roll it between your fingers until the two colours are no longer distinguishable from each other.
Waterproof PC-Plumbing is not only waterproof but has excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Multipurpose Use PC-Plumbing on fibreglass, all metals, PVC, glass, tile, ceramics and more. Safe for contact with potable water, NSF rated. (Some surfaces may benefit from prepping before use.)
Finishing touches After PC-Plumbing has cured it can be sawed, sanded, tapped, drilled, machined, filed and painted.
Work time (at 21c): 3 min Service time (at 21c): 1 hour No drip or sag: ✓ Fill characteristics: Good Apply to wet surface: ✓ Heat range: -30c to 120c Tensile strength: 900 PSI Colour: Grey Tintable: ✕
For more product information, including prep and cleanup tips, FAQs and safety data sheets, please click here.
Buy PC-Plumbing 2oz by PC-Products:
Purchasing has now moved to our dedicated PC-Epoxy website. Please click here to purchase.
PC-Plumbing is available in these sizes:
Take a look at PC-Products' other Emergency Repair products:
